How big should a seating chart sign be?
Which print size fits your guest count, how large the names need to be, and what font size to expect on 16×20, 18×24 and 24×36 inch seating chart signs.

In short
- 18 × 24 in is the usual size for up to about 120–150 guests; 24 × 36 in suits larger weddings or a sign that guests read from further away.
- A common sign-industry rule of thumb is 1 inch of letter height for every 10 feet of viewing distance.
- Guests walk up to a seating sign and read it from about 2–3 feet. By that rule, capitals of 0.2–0.3 in (roughly a 22–32 pt font) are comfortable; smaller names still work, but people lean in.
- On an 18 × 24 in sign, 120 guests come out at about 21 pt in our Classic style; on 24 × 36 in, about 33 pt.
The right sign size depends on two things: how many names it has to hold, and how far away people stand when they read it.
Common sizes
| Size | Typical use |
|---|---|
| 11 × 14 in | Small dinners, or one sign per section of a large room |
| 16 × 20 in | Up to about 80–100 guests |
| 18 × 24 in | The most common choice; comfortable up to about 120–150 guests |
| 24 × 36 in | Large weddings, mirror signs, or a sign that must be read from a few steps back |
These ranges are practical guidance, not a rule. Long names, a large heading or a decorative script font all take space.
How large do the names need to be?
Sign makers often use a simple rule of thumb: 1 inch of letter height per 10 feet of viewing distance. Signs.com uses this ratio in its letter-height visibility chart. It is deliberately generous: it aims at easy reading, not the furthest distance at which text can just be made out.
A seating sign is read close up. Guests walk up to it and look for their name from about 2 to 3 feet. By the rule, that needs letters about 0.2 to 0.3 inches tall.
Font sizes are given in points, and 1 point is 1/72 of an inch. The capital letters of most fonts are roughly two-thirds of the point size. So:
| Font size | Capital height (approx.) | Comfortable reading distance by the 1 in / 10 ft rule |
|---|---|---|
| 14 pt | 0.13 in | about 1.3 ft |
| 20 pt | 0.19 in | about 1.9 ft |
| 28 pt | 0.26 in | about 2.6 ft |
| 36 pt | 0.33 in | about 3.3 ft |
Script fonts read smaller than their point size suggests. With a script style, aim for the upper end.
What font size you actually get
We ran a list of guests with typical first and last names through our sign maker in the Classic style, portrait, with eight guests per table. These are the guest-name sizes it chose:
| Guests | 16 × 20 in | 18 × 24 in | 24 × 36 in |
|---|---|---|---|
| 80 | 22.9 pt | 27.2 pt | 36.3 pt |
| 120 | 19.2 pt | 21.1 pt | 33.4 pt |
| 160 | 17.0 pt | 21.1 pt | 28.7 pt |
| 200 | 13.5 pt | 16.8 pt | 26.6 pt |
Grouped by table. An alphabetical list gives similar sizes. Your own list will differ slightly, which is why the sign maker shows the size for your names as you go.
Two things follow from the table. Up to about 150 guests, 18 × 24 in keeps names at about 21 pt or more. For 200 guests, 24 × 36 in keeps names above 24 pt, while 16 × 20 in drops to a size people have to lean in to read.
Portrait or landscape?
Portrait suits easels and most frames, and it is how most guests expect a seating sign to look. Landscape gives more columns side by side, which helps when you have many small tables: 20 tables of 8 fit better in five columns of four than in three long columns. If names become small in portrait, try landscape before going up a size.
One sign or two?
Above about 150 to 200 guests, or when most guests arrive at once, a single sign becomes a bottleneck: everyone crowds around the same board. Two signs solve both problems:
- Split alphabetically, A–K on one and L–Z on the other, when the sign lists guests alphabetically. Put a clear letter range at the top of each.
- Split by tables, 1–10 and 11–20, when the sign is grouped by table. This works less well, because guests do not know their table yet.
- Make both the same size and style, and place them a few steps apart, so two queues form instead of one crowd.
The same name size then fits on two 18 × 24 in signs that would need a 24 × 36 in sign on its own, and two smaller signs are often cheaper and easier to transport than one large board.
Where to put it, and how high
- At the entrance to the reception room, or where guests gather before going in, with room for several people to stand in front of it.
- With the names at eye level. On an easel, raise the sign so the guest names are roughly at the eye level of a standing adult, not at waist height.
- Out of direct sunlight and away from spotlights, which cause glare on glossy prints, acrylic and mirrors.
- Near the escort cards or table plan, if you also have them, so the two do not compete for space.
Ordering from a print shop
- Download the PDF at the exact size you are ordering, so nothing is stretched or cropped.
- Choose the material: paper poster (put it in a frame), foam board (rigid, light, stands on an easel), or canvas and acrylic for a keepsake.
- Ask for a proof or check the preview on the shop’s site. Look at a few names at 100% zoom.
- Check the lead time. Large prints and mounting can take several days, and you want a margin for late changes.
- Order the easel separately if the shop does not include one, and check that it can hold the board’s size and weight.
Print it sharp
A seating sign is mostly text, and text should be printed from a vector PDF, not from a photo or a screenshot. Vector text stays crisp at any size, so a file made for 18 × 24 in can also print at 24 × 36 in. If you order from a print shop, ask for matte paper or foam board: glossy prints reflect the room lights.
Frequently asked questions
What size is a seating chart mirror?
Mirrors vary. Measure the glass area that will show the names (not the frame) and pick the nearest print size, or a size that fits inside it. A 24 × 36 in sign fits many floor mirrors.
Can I print a seating chart at a regular print shop?
Yes. A PDF in the exact size (for example 18 × 24 in) can be printed as a poster or mounted on foam board at most print shops and online printers. Ask for foam board or a rigid backing if it stands on an easel.
Portrait or landscape?
Portrait is the usual choice for easels and mirrors. Landscape works well on a wide table display or when you have many tables with few guests each.
Can I use an A-size paper instead of inches?
Yes. A2 (420 × 594 mm) is close to 16 × 24 in, and A1 (594 × 841 mm) is close to 24 × 33 in. Our sign maker offers A1 to A4 as well as inch sizes.
Sources
- Signage 101: letter height visibility, Signs.com
- ISO 216 paper sizes (A-series dimensions), International Organization for Standardization
Photos are AI-generated illustrations; diagrams and tool screenshots are made from the PlanPrint tools. Something out of date or wrong? Tell us and we will correct it.


